Electric Heating Wood Heat Treatment Equipment Not Using Chemicals Customized
Ⅰ Product description
Thermo wood machine is mainly used for the production of carbonized wood, and through high temperature treatment to let the wood to achieve the purpose of anti-corrosion pest control and other purposes. Treated wood has a natural texture and beautiful appearance. Due to not need chemicals in the process, it is more environmentally friendly.
The thermo wood produced can be used for indoor and outdoor wooden floors, wooden houses, wooden pavilions, etc., and has a wide range of uses.
Compared to the conventional carbonization tank, this thermo wood machine does not require a boiler and has a low investment cost. It is very suitable for investors who want to start a new project.
Ⅱ Technical parameters
| model | Thermo wood machine |
| Design temperature(℃) | 240℃ |
| Using temperature(℃) | 190--220℃(you can adjust it by yourself) |
| Design pressure(Mpa) | 0.85Mpa |
| Working pressure(Mpa) | 0.1-0.7Mpa |
| Design vacuum degree(Mpa) | -0.098mpa |
| Electric heating power | 48KW |
| Design inner diameter | 1800mm |
| Effective length | 6000mm |
| Total treated capacity (m3) | 15.2cubic meter |
| Treated capacity (m3) | 8 cubic meter |
| Tank material | Q345R carbon steel |
| Inside tank heat material | Stainless steel |
| Heat ways | Electric heating |
| Cooling ways | Natural cooling |
| Tank heat preservation | outside with double heat preservation ,outside is stainless steel plate protective |
| Heat distribution | hot wind reciprocate circulation |
| Open door ways | Manual open door |
| Sealing ways | Filling air FKM rubber gasket (resist 300 degree ) |
Ⅲ Technology Process
Put the wood into the tank---- high temperature steam dry in the tank----- high temperature heat treatment ------cooling-----balance the pressure and recover the room temperature----take the wood out-----Finish
Ⅳ Our advantage
1. Compared with the traditional box-type drying kiln, our thermo wood machine using cylindrical structure, the temperature distribution is more uniform, the produced wood has no cracking, no deformation, and the qualified rate is higher.
2. This carbonization tank using electric heating, does not require a boiler, lower investment cost.
3. The processing time is short, it usually takes 2-3 days. If the moisture content is 15%, finish one batch only need one day, reducing the customer's time cost.
4. Use PLC touch screen automatic control, more secure and reliable.
5. In terms of structure, our company has special inspection and testing, and will do stress testing. The government inspection department will issue a certificate of conformity.
Product Tags:
|
|
Electric Wood Heat Treatment Equipment Not Using Chemicals Customized Images
|
